Decided to teach myself TIG. I have found loads of info on various sites including Welding Tips and Tricks.What I have not found is,What does a proper weld look like? For example how wide is an ideal bead ? With and without filler.Aluminum and steel.

Hey just wanted to show some more of the interesting things I’ve got to work on.
1. Extending a trommel with customers old sheet metal
2. Repairing cracks and a hole were a stainless hopper had been punched through.
3. Super heavy duty split bushing hangers made to help with breakdowns on cement auger.
4. Emergency repair on a cement auger.
Tig alluminum on a hydraulic pump for a forklift supposed to be a bandaid till the new one came in but they are still running it lol.
6-7. Rebuild on the roof of a rotary impact crusher with hardox 500.
8. Lining aggregate hoppers with my brother.
9. Alluminum pivot handrail at cement processing facility.
10. Welding the broken studs out of the head of a international truck that snapped off.

I wish I could put more photos per post I have about a 1000 photos from my different jobs:)

Love the community on hear can’t wait to keep learning every day:)

Hey everyone my name is Nathan Leiter. I’m 28 and own my own welding repair and industrial maintenance business. The first rig in the photos is the one I’m currently in and the old ford was my first rig. It had a Miller big 50.

I was working on industrial plants doing production and maintenance before college. I first started getting to weld right before I left for college. I studied business, then in college I worked in maintenance on appliance repair and then weld shop. Every summer I worked in the factories and welded.

I found welding tips and tricks podcast one year out of college. I had a passion for welding but was mostly self taught once I had the podcast I could listen to them while I worked. I’ve listened to every podcast and accelerated my learning.

I planned leaving my job 5 years ago and started to lay the ground work saving money and buying equipment. My wife and I kept our expenses low and we’re blessed to have somewhere to stay for very low rent. The last 2 years I worked for someone I made just over 100,000 and we lived on as little as possible. I was blessed with a boss who supported me as I grew. He gave me my truck for free it is a 2007 f550 with the long wheel base. It was cab and chassis with a blown head but it was free. I had it bullet proofed because it is a 6.0 I bought another truck with a blown head and used the telehandler that my boss sold me for a steal to mount the bed. I had to have front end work done.

It’s got a bulletproofed engine with 100,000 miles on it and almost 300,000 on the frame a Miller bobcat 250, a 4000 pound crane and 2 suitcase welders and a complete set of industrial tools. I had to fix everything myself or pay budies to help me. I’ve got about 20,000 in the set up and it has been going strong for me ever since I started. Like I said I was blessed and worked hard in the opportunities I was presented.

While I was working for my boss I convinced him to give me raises but I would use my own equipment. This allowed me to learn how to use suitcase welders build jigs and do production welding, weld repair on concrete crushers, screeners, scalpers, earth moving equipment, trucks, trailers, ready mix trucks, aluminum, stainless, steel, hardfacing bolt extraction, and all the repairs I could stand on the plant equipment. After leaving to be on my own my former boss is still my #1 customer and I give him priority. I’ve got a humble lean-too with really bad concrete but I had 3 phase power run to it. It’s a good start and I want to grow faster but I know that I should take it slow.

My father was a huge blessing helping me to do things right. He wouldn’t tell me I couldn’t do it but he would say if your serious then work harder and pay for everything up front. He kept me grounded. Here is some of the equipment I bought while I was working for my former boss.

I use a Miller bobcat 250
I have 2 8vs suitcases
One 12vs suitcase
A Miller 161 stl
a everlast 210 stl
A everlast 255 ext
A Lincoln 350mp with a push pull gun
A old Miller dial arc high freq ac unit
A old 400 amp Hobart for arc gouging
I have two Amazon cheap buzz boxes
A thermal dynamics plasma cutter

I have some shop equipment but most of it is in storage. Still saving to get new concrete and close in shop.
75 ton press with a swag finger brake for small stuff
40x10 Pearson milling machine
Langmuir fixture table
Small craftsman lathe
8k telehandler that runs rough but does everything I need it to do.

I just feel like I stumbled upon a great way to accelerate your journey to having your own business and did it slowly so that it was as safe as it could be. Definitely get a Cpa immediately though lol

I absolutely love the guys on welder skills and the blessing that wtat and welder skills have been are far beyond the cost of the platform. Would love to meet the guys one day:) I’m in sc but I travel a lot for work:) I really appreciate the help of all the instructors!

A month ago I took on this trailer , making some small odd repairs, including removing that battery, and relocate in side the newly mounted tool box. The real challenge was replacing the hydraulic pump , hose and fittings to match up with the original hydraulic ram. Then figuring out how to wire in the switch for a single action hydraulic line ( manufacturer had it set for dual action)
Finding the right fluid wasn’t to difficult, and with support of a local hydraulic parts supplier it only took a couple of trips. lol
Ill show the hydraulics in action on the next video.

This thing felt like I was working on a giant rat trap. Now that I’m done I want to see it dump a load. lol also make me wanna build a crane or something, imagine that.

Just got my stickers last night , really digging em. Thanks all.

New here and new to welding teaching myself mig welding so far I can fuse 2 pieces together

Hey everyone, my name is Jeff. Been following Jody for years on YT. I am a retired local government employee. Been mig welding for years and recently decided to try to get my stick welding skills up to speed. Seems quite a bit different to me. Will probably have TONS of questions, so please forgive me. Been using a Miller Syncrowave 200. My mig welder is a Miller 210. I hope to learn a lot on this platform.